Cincinnati roll-offs / 30-yard box
30-yard dumpster rental in Cincinnati.
Same 22-foot footprint as the 20 — the extra ten yards are all height. Six-foot walls hold the volume that gut renovations and cleanout-plus-remodel jobs produce.
01 / THE 30-YARD BOX
Volume for the big tear-outs.
The 30 is the box for jobs measured in rooms, not corners.
Height, not footprint
A 30-yard roll-off runs 22' L × 7.5' W × 6' H. It parks in the same space as the 20-yard box — the capacity gain is the extra foot and a half of wall. That means the placement questions don’t change: a firm, level pad and a straight truck approach. What changes is loading. Six-foot walls are too tall to lift over comfortably, so the rear door does the work. Plan the route to the door before the box lands, and fill from the back forward.
The jobs that need it
Multi-room renovations. Whole-house cleanouts stacked on top of a remodel. Retail and office clear-outs. Demolition debris from interior strips. Renovation in Cincinnati’s older housing compounds fast — opening one room exposes the next, and layered flooring, plaster walls, and full-height built-ins produce more volume than the floor plan suggests. When the project spans trades and weeks, the 30 keeps a mid-job second haul off the schedule.
Where the bulky loads go
Ohio-side loads run to disposal points like Rumpke’s landfill on Struble Road in Colerain Township — the company’s flagship site for the metro, managing up to 12,500 tons of trash daily. Its published accepted list reads like a 30-yard manifest: demolition debris, drywall, wood waste and pallets, mattresses, furniture, and appliances. Refrigeration units carry a Freon-handling requirement at the facility, so flag them when you call.
What the 30 is wrong for
Dense material. Concrete, brick, dirt, plaster, and shingle-only loads reach hauling weight while a 30 still looks half empty — you would be paying for walls the load can’t use. Heavy debris belongs in a 15 or 20 with an agreed fill level. The 30 earns its height with light, bulky volume: framing lumber, cabinetry, furniture, packaging, drywall. If your job produces both — a gut renovation with a masonry chimney coming down, say — ask about splitting the material instead of mixing it.
Keep the load under the rail
A 30 tempts over-filling because the walls hide the pile. The load still has to ride below the top rail with nothing hanging over the sides. Break down long pieces, lay bulky items flat, and keep banned materials out — the materials guide lists what the landfills will and won’t take. Call when it’s ready and we’ll schedule the haul.
Call (513) 506-3038 with the scope — rooms, materials, and dates. If the job is big enough for a 30, it’s worth two extra minutes of description to set the right terms.
02 / FAQ
30-yard questions, answered straight.
The big box has two rules: load through the door, and keep dense material out.
How do I load a dumpster with six-foot walls?
Through the rear door. Plan the loading route before the box lands, load the back first, and keep the door path clear until the end. Drop bulky pieces flat and break down long framing so nothing rides above the top rail.
Is a 30-yard dumpster too big for a driveway?
Not because of the height. The 30 parks in the same 22-foot footprint as the 20 — the placement questions are identical: a firm, level surface and a straight truck approach. If a 20 fits your driveway, the 30 usually does too.
Can concrete or a full roof tear-off go in a 30-yard box?
That is the wrong box for dense-only loads. Concrete, brick, dirt, and shingles hit hauling weight while a 30 still looks empty. Heavy material rides in a 15 or 20 with an agreed fill level. For a mixed job, ask about splitting the heavy fraction out.
Do mattresses, furniture, and appliances go in a 30?
Yes — the regional landfill’s published accepted list includes mattresses, furniture, and appliances. Refrigeration units carry a Freon-handling step at the facility, so flag them when you book. Batteries, tires, and liquids stay out of the box.